top of page
NTCRE010R1 NTCRE010R3 megane 2 II RS R26 R26-R

Nitron NTR R1 / R3 - Megane 2 RS

Renault Megane 2 RS ( R26/ R26R 06-09)

Adjustable drop links not included.

 

NTR R1 SYSTEM

The NTR R1 system offers unrivalled performance and value with a design that gives drivers a wide range of effective, easy to use damping control.

2-Way combined damping adjustment. Developed from our full race suspension and sharing many components with the R3 system, the R1 offers exceptional performance, reliability and value for both road and track use. Widely praised by drivers around the world and respected for out-performing considerably more expensive suspension kits.

R1 kits provides uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components, the R1 shock is made to last on the road and track.

 

NTR R3 SYSTEM

The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control.

Featuring 3-Way independent damping adjustment and ride height adjustment, by incorporating our class leading large diameter 46mm piston and ultra-strong piston rod at the front of the car, the R3 system demonstrates outstanding levels of performance, damping control and adjustment. Piggyback or remotely mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car. The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas.

On a standard factory car it will lower the car between 20mm and 50mm depending on the settings used. Because the dampers have a wide range of rate adjustment you should be able to achieve setting ranging from fast road to full track settings and this will certainly help control the way the car behaves under extreme conditions. If your car is otherwise modified it hard to be precise with regards to exactly what ride height settings can be achieved, so please bear in mind that once the kit is fitted there may have to some experimentation with ride height and possibly spring rates on your part. If additional springs are required to achieve the ultimate desired settings, these will be chargeable as an extra.

Our kits are supplied complete with high precision fully CNC machined, independent caster and camber adjustable front top mounting plates for the dampers which include spherical bearings in place of the original rubber mounts and therefore allow the suspension geometry to be adjusted and set very accurately. The lack of unwanted movement within the mounts under extreme driving and track conditions mean that the geometry of the car will remain constant under all conditions and this will ensure that the car will handle and perform in a far more constant and predictable manner. Please bear in mind that the use of spherical bearings and the lack of rubber will result in a higher level of suspension noise being transmitted into the car which can in turn reduce the level of overall refinement of the car.

The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters.

 

BI-AXIS HOSE FITTINGS

NTR Hose shocks are fitted with Nitrons exclusively developed Bi-Axis fittings that allow for simple and precise installation.

 

NTCRE011R1

NTCRE011R3

 

All kits are made to order, so allow 2-3 weeks for production before dispatch. 

    PriceFrom £2,918.00
    Excluding VAT
    bottom of page